This router can be used with the following types of rotary cutting bits:.The router can be used for rabbeting, rounding off, chamfering, routing of edges, as well as pitting in wood and plastic.certain industrial chemicals, and bleach or bleach containing products, etc., Can cause a short circuit.Corrosive or conductive fl uids, such as seawater, Warning! To reduce the risk of fi re, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack or charger in fl uid or al-low a fl uid to fl ow inside them.In case of eye contact rinse thoroughly for at least 10 minutes and
In case of contact with battery acid wash it off immediately with soap and water.
Battery acid may leak from damaged batteries under extreme load or extreme temperatures. Never break open battery packs and chargers and store only in dry rooms. Do not use battery packs from other systems. Use only System M18 chargers for charging System M18 battery packs. Do not store the battery pack together with metal objects (short circuit risk). Milwaukee Distributors off er to retrieve old batteries to protect our environment. Do not dispose of used battery packs in the household refuse or by burning them. Remove the battery pack before starting any work on the machine. Unclamped workpieces can cause severe injury and damage. Clamp your workpiece with a clamping device. When working in walls ceiling, or fl oor, take care to avoid electric cables and gas or waterpipes. The insertion tool may become hot during use. Do not reach into the machine while it is running. it has pierced through the material to be machined. it is tilted in the workpiece to be machined. rectify this, paying heed to the safety instructions. Determine why the insertion tool stalled and Switch the device off immediately if the insertion tool stalls! Do not switch the device on again while the insertion tool is stalled, as doing so could trigger a sudden recoil with a high reactive force. Do not machine any materials that present a danger to health (e.g. when working oak or beech wood, stones, paint, which could contain lead or other harmful chemicals). The dust produced when using this tool may be harmful to health (e.g. Only move the workpiece in counter rotation to cutter (only work oppositely oriented)! For security, use devices such as safety- and pressure device, guide slide, rip fence, etc. Put the router back to original position after usage (loosen clamping lever to secure cage). The workpieces should be clamped down before cutting. Only use router cutter with correct shank diameter. Only use professionally grinded router cutters. Chips and splinters must not be removed while the machine is running. Only use tools whose permitted speed is at least as high as the highest no-load speed of the machine. Always use the protective shields on the machine. Never reach into the danger area of the plane when it is running. It is recommended to wear gloves, sturdy non slipping shoes and apron. Always wear safety glasses when Always wear goggles when using the machine. ADDITIONAL SAFETY AND WORKING INSTRUCTIONS Only the collets may be used, which are supplied with the machine. The rotary cutting bit must be suitable for speed up to 31000 min-1. 
Only use rotary cutting bits are suitable for the speed of the tool.Holding the work by your hand or against the body leaves it unstable and may lead to loss of control. Use clamps or another practical way to secure and support the workpiece to a stable platform.Coarse adjustment Fine adjustment TRIM ROUTER SAFETY WARNINGS PACKAGE CONTENT Remove the battery pack before starting any work on the machine.
#MILWAUKEE ROUTER MANUALS#
17.1 Related Manuals / Resources Milwaukee M18 FTR Trim Router
0 kommentar(er)
